Hugo D'Esposito
Sump Pump
Comments Off on Maintenance Tips for Your Sump Pump in White Plains NY 10601
Maintenance Tips for Your Sump Pump in White Plains NY 10601
According to the American Society of Home Inspectors, more than 60% of homes in the country experience problems with wet basements. You are therefore not alone if you’re facing challenges with a wet basement.
A sump pump in White Plains NY 10601 is an effective device in helping you prevent damage to your basement and prevent flooding. The appliance is usually installed in a pit within the basement. Water accumulates in the pit and is pumped out when it reaches a threshold level. This is usually set to a level approaching floor level. This prevents water from accumulating in the basement and ruining the items you’ve stored there.
These appliances usually require very little in the way of maintenance. However, it is important to ensure that you allow for regular inspection and maintenance to lengthen the lifespan of your appliance.
Here are the tips to help in the maintenance of your sump pump in White Plains NY 10601
- Find a professional contractor
All repairs, inspections and maintenance should be carried out by a professional with knowledge and experience in the repair and maintenance of these pumps. This ensures that your device is in good hands.
- Schedule annual inspection
It is important to schedule annual inspection of your sump pump. This will ensure that it is in working order for the rest of the year. Schedule this appointment before the wet season. By doing this you’ll have peace of mind knowing that your pump is in great working order.
- Check your inlet screen
Check the screen on the inlet of the device. This screen ensures that debris and residue does not enter the pump and destroy it. Check to ensure that the screen is in good condition. Also check to ensure that there is no debris or residue clogging the screen. This will help make sure that the pump works efficiently and does not strain. Inspection of the screen should be done at least three times a year.
- Clearing debris and residue
It is also important to check the pit regularly for debris such as branches and stones. These should be cleared out regularly. In addition, it is vital to clear out residue and mud that may accumulate in the pit.
- Test runs
Test your pump regularly to ensure that it is working well. Run it and allow it to empty water from the pit. You can pour water into the pit using a bucket. Check to see if your float switch will be triggered when the water gets to the maximum level.